Toyota Celica DIY

Install Kit Includes As Follows:

2- 1′ Self Tapping Screw

2- 1″x1/2″ Metal Tubing

4- Rivets

2- Aluminum L Brackets

10- Push In Clips
————————————————————————–

Install Instructions

You will need 1/4″ drill bit to drill push in clip holes and a drill bit for drilling the holes for the rivets.

Step 1- Mount L bracket in the front to the lower fenders using rivets.

Step 2- Set skirt up to aline for drilling holes to mount.

Step 3- Drill one 1/4″ hole in the front through the L bracket and one and one through the back quarter panel edge.

Step 4- Drill one 1/4″ hole through the back bottom and two in the front bottom then push clips in to secure your side skirts.
(We recomend not using your old clip holes)

Step 5- Place one peice of the tubing under the bottom in the middle and use a self tapping screw to attatch to the side skirt. This is to stabalize the middle of the skirt.

“Pictures are posted as to follow the instructions”

Finished Product:

Thanks
Justin B