installing a rear spoiler in a 10thgen/9thgen rolla (with brake light)

Hey everyone! Got the spoiler yesterday and here is the DIY! Mounted it this mourning and took me about 20 mins Here is the victim! 96d5116eb47a575749d5f0eb3ee29500  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 6e266e045437fc5c1a93a82df534ad6a  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) The spoiler was ordered from ebay, it came pre-painted and arrived in PR in about 4 days which was really fast IMO 897f317053f47ac36afca2a285434f58  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) First I taped the pattern to the spoiler, and then I put the spoiler over the trunk and aligned it carefully. Then I taped the patterns to the car and removed the spoiler and ended up with this Be carefull you don’t over drill because the drill might end up hitting the body pannel For this I selected a smaller drill bit because it easier to make a hole this way, then I enlarged the hole with a larger bit 77e14c9b3872267091cd7fc164c13fed  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 710f776970a87ac585bcc5e705455cd6  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) here is the small hole(right) vs. the bigger hole (left) 659475f0fc9778fb80e53ea6ecbca5d5  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) fad73f6652e9dddb30c26f228c51db70  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) After that I had to enlarge the outer holes because the trunk only has one opening. I did this because the bolt head didn’t fit through the first hole I did 3ffb3d8ea6ac2c178cf44e39758e23a3  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) Then I taped the screw to my screwdriver so it didn’t fell through the trunk! If it falls you loose it! b44025af76c75a952f89614ea2bb9c5d  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 1288ad5a3f6cc7a9c2dded4cf97dd047  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) I ran the brake light cable through this opening f6b3a0e353ad4f42d653d8121612b7f7  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) then covered it with this, to keep the factory look And instead of connecting it to the 3rd brake light I connected it to the taillights because it is easier and the cables have better access 13cef32870c4332234d333f1822281ef  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) these are the cables running from the spoiler! 821544ea8da2fc44e93459bfb0c3c813  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 541df9bd729ca24aa5354ec0b62887d2  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) I ended up mixing the connector colors ( I think ) but this is how it should look like! Just have them bite the cables just like the picture 03198b68cf17bb9444818bfbfb9f8187  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) and its DONE! 57d132d24eb3705149089f3947dc99f3  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) dcabe540e2f5aca448930f91060f0026  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 5522e4e92fac2ee2f4af79ab6b11f9fc  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 0a96fc6f01d52df3ac3d25f0cc0a9baa  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 2b52b6112384cacb4cf60b136dbbfb2c  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) 09a1a7ddaa42b60b3129296dd55c4370  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light) night shot! fda85c29bc9a1fb889563973d21d31a0  installing a rear spoiler in a 10thgen/9thgen rolla (with brake light)

Both comments and pings are currently closed.

Comments are closed.