License plate to the side for cheap

5ae64593bfc51dcb5916539718182133  License plate to the side for cheap

TOOLS:
DRILL (WITH BID)
SHARPIE (COLOR YOU CAN SEE DEPENDING ON UR CAR)FOR EXAMPLE{RED CAR=BLACKMARKER///WHITE CAR ANY COLOR MARKER///BLUE CAR=BLACK MARKER}
SCISSORS OR WIRE CUTTERS
2 ZIP TIES
MASKING TAPE
e9c275001f08f76258dc08f4c9499347  License plate to the side for cheap

FIRST TAPE THE BUMPER SO U WONT SCRATCH IT WITH THE DRILL
f2530eaa0aa49161ed95e62b53333ecd  License plate to the side for cheap

USE A DRILL BID THAT IS NOT SO BIG..THIS ONE WAS GOOD FOR ME
549a8068ba7746d058fb1d3c2219972e  License plate to the side for cheap

SET LICENSE PLATE UNDER THE AREA SHOWN MAKE SURE IT NOT TOUCHING THE SIDE AND DOT INSIDE THE HOLES OF THE PLATE WITH SHARPIE…(TO MARK WHERE THE HOLES WILL BE)
a80fcee121175ac6930ba317557aff9e  License plate to the side for cheap

THIS IS THE HOLE DRILLED
fa8383b24a22cff1ff3f8ca6e4770ecc  License plate to the side for cheap

DO THE SAME TO THE OTHER SIDE SO THAT IT LOOKS LIKE THIS(I MESSED UP THE FIRST TIME LOL)
1f647077b135ef113940af218effef53  License plate to the side for cheap

BEND THE ZIP TIE TO PUT IT THROUGH HOLE
c24cac8ab81ad66b9a45df896f55077e  License plate to the side for cheap

a588c569605c2945edaf7e069d9976ee  License plate to the side for cheap

THEN JUST TIE IT UP GOOD (YOU DON’T WANT THE PLATE FALLING RITE)
4a799681815717641965f57eaac6c5fb  License plate to the side for cheap

CUT THE LITTLE PIECES HANGING TO MAKE IT LOOK CLEAN
c9e7217975eb11a60b74def9b2ce3300  License plate to the side for cheap

THIS IS HOW IT SHOULD LOOK
4dc638d677e1e525c6098e2b4ed73329  License plate to the side for cheap

you can make one of those relocation brackets out of some angle iron that they sell at home depot for like less than 5 dollars.

or buy one like this on ebay for like 12
fb2ea9352cd6f99d38e49ff2688133ae  License plate to the side for cheap

yea it does cost a little but more than the zip ties but the plate is also secured better

Both comments and pings are currently closed.

Comments are closed.