Lip protection!

WARNING: I am not responsible for anyone’s pain and suffering nor damages to their damn car. Its your fault you can’t do it and always blame others.

Alrighty guys heres how it goes, I was looking at my homies car and he showed me the HD front lip, HOME DEPOT. It was actually very interesting and gave me a bright idea. If anyone wants more information on the home depot lip just google “Home depot front lip.”

HERES THE LINK TO THE FRONT LIP:
http://www.srtforums.com/forums/f75/…ot-lip-379671/

Moving on, this applys for all cars that have a front lip.

Tools Needed:

-Car (So you can drive to home depot and home)
-Double sided 3M Tape (sh*t is strong, no lie)
-Painter Tape
-Garage Bottom Seal (Part #03749 from home depot)
-F**ken Razor Blade / Knife (Sh*t f**ken cut me)
-Something soft to lay on the ground or just get down and dirty!
-Tissue
-Some Bandaid
-Bat for protection if you outside by yourself.
-Bottle of Orangina

Lets get started:

Step 1:
Go to home depot and buy the Sh*T you need. If you don’t have a home depot then go to some other hardware store fool.

Buy the Garage bottom seal
49a6ddb634eb2935dea27e0377433a90  Lip protection!
Painter tape, Double sided tape, and w/e else you need.

Step 2:
Go home take the bat out for protection, and measure how much you need of the garage lip for each lip. Then cut it out with a SCISSOR OR A BLADE. After you cut it out, you can either use a long piece of double sided tape and put it on the lip or just cut little pieces like I did to save you the pain of wasting money.



NOW WHEN CUTTING BE VERY F**KEN CAREFUL CAUSE I WAS INTERRUPTED BY SOMEONE AND GOT OWNED FOR IT. Didn’t have a band aid so improvised.

Step 3:
Slap on the bish with some force and make sure it stays. If you need some more 3M tape then use it.


Step 4:
After you slapped all the lip on make sure to cut the endings off to make it even doesn’t have to be perfect though.

Step Finished:
finally have a bottle of your favorite beverage and stare at the car for a bit.

IF YOUR WONDERING WHAT THE PAINTER TAPE IS FOR, IT WAS USED FOR MY BAND AID AND USED TO HOLD UP THE LIP TO SEE HOW IT LOOKED LIKE.

Another thing you can use are screws to make sure the lips don’t fall off but i anit responsible if u don’t know how to use a drill.

Both comments and pings are currently closed.

Comments are closed.